| |
Fiber
Optic Cleaver A8
|
|
| [Features] |
■
Cleave angle deviation typically ＜0.5°under on-site
conditions
■
Easy one step cleaving operation：Fiber clamping，
bending， scratching and cleaving with one single action
■
Diamond blade or high cleave quality and long
life（typically＞10 000 cleaves）
■
Interchangeable fiber guides (options)
■
The design provides low susceptibility to interference
and dirt and facilitates easy cleaning |
|
|
| |
|
| |
Multi
Fiber Cleaver D12
|
|
| [Features] |
■
Cleave angle deviation typically＜1°with highest
reliability and low scattering under on-site conditions
■
Easy one step cleaving operation: Clamping, bending,
scratching and cleaving with one single action
■
Turnable cleave wheel with 12positions for high
cleave quality and long life(typically＞6，000 cleaves with
12-fiber ribbons per cleave wheel)
■
For single fibers as well as up to 12-fiber ribbons
and ribbonized fibers by using handing adapters (options)
■
Minimum fiber cleave length: 3.5mm(single fibers
with up to 250μm coating); 10 mm(single fibers with coating
diameter from 250 up to 900μm)
■
Fiber diameter:125μm nominal
■
Coating diameter: up to 900μm(single fibers)
■
Adjustable for cleaving fibers with increased
tensile strength, e.g. titanium-coated fibers
■
Low susceptibility to interference and dirt
■
Cleave wheel easily exchangeable on-site |
|
|
| |
|
| |
Fiber
Optic Cleaver D6
|
|
| [Features] |
■
Cleave angle deviation typically＜0.5°with highest
reliability and low scattering under on-site conditions
■
Easy one step cleaving operation: Clamping, bending,
scratching and cleaving with one single action
■
Sliding Table for easy insertion, positioning
and removal of fiber without risk of damage
■
Diamond blade for highest cleave quality and long
life(typically＞10 000 cleaves)
■
Fiber cleave length: 3.5 to 15mm
■
Fiber diameter:125μm nominal
■
Coating diameter: up to 900μm
■
Adjustable for cleaving fibers with increased
tensile strength, e.g. titanium-coated fibers
■
Low susceptibility to interference and dirt |
|
|
| |
|
| |
Ribbon
Splitting Tool RST-000
|
|
■
The RST-000 is a ribbon splitting tool to prepare up
to 36 fiber ribbons for splicing with the ribbon fusion splicer
X75-12. The RST-000 has nine positions which accommodate ribbons
from 4 to 36 fibers, as indicated by the sum of the stacked
numbers on the tool. A high-precision slider mechanism splits
the ribbon matrix to create two smaller ribbons. The tool s
bi-directional (i.e., ribbons can be pulled through its channels
in either direction).
| ORIGINAL RIBBONFIBER COUNT |
RIBBON CONFIGURATION AFTER SPLITTING |
| 36 |
12/24 |
| 24 |
12/12 |
| 12 |
6/6 4/8 2/10 |
| 8 |
4/4 6/2 |
| 6 |
2/4 |
| 4 |
2/2 |
|
|
|
PD-Electrodes
|
|
■
No manual cleaning of the PD-Electrodes is necessary
■
Less maintenance time means more splicing time
■
Stabilization of fusion arc and heating of fibers
■
Worry free operation regarding the condition of the arc
■
Reduction of the average splice loss up to 50%for higher
productivity
■
No training required for removal, cleaning and reinstallation
■
No damaged electrode tips |
|
| |
|
